Home / Stack to cord and face cord measurer
Stack to cord and face cord measurer
Stack the wood neatly, measure it, and convert the volume to full cords. You can also see how many face cords that is at the piece length you choose.
How the measurement works
Stack volume in cubic feet is length times height times depth, with all three in feet. Full cords equal that volume divided by 128. That 128-cubic-foot figure is the cord defined in NIST Handbook 130: the amount of wood contained in a space of 128 cubic feet when the wood is ranked and well stowed.
If you enter a piece length and a number of rows, depth is rows times piece length (converted to feet). If you type an overall depth, that value is used instead, which is the right path for a partial row or a pile that is not an even number of rows.
Face cords are counted by dividing the same volume by the volume of one face cord: 4 feet high, 8 feet long, and as deep as the pieces are long. Utah State University Extension describes a face cord that way, and notes that pieces are commonly 12 to 18 inches, so the volume is commonly 32 to 48 cubic feet. Handbook 130 does not define a face cord, and Section 2.4.4 says terms such as "face cord," "rack," "pile" and "truckload" shall not be used when selling wood for fuel in states that adopted the rule.
Worked examples
A single row 8 feet long and 4 feet high of 16-inch pieces is 42.7 cubic feet, which is exactly 0.333 of a full cord, or 1.00 face cord at that piece length.
Two such stacks come to 0.667 of a full cord, or 2.00 face cords.
A woodshed row 20 feet long, stacked 4.5 feet high, with 18-inch pieces, is 135.0 cubic feet, or 1.055 full cords.
A classic 4-by-4-by-8-foot pile is exactly 1 full cord, and so is a 2-by-4-by-16-foot pile. Both are the pictures used in the NCWM and NIST buyer fact sheet.
Sources
- NIST Handbook 130 (2025): Uniform Laws and Regulations in the Areas of Legal Metrology and Fuel Quality, Section 2.4
- National Conference on Weights and Measures / NIST: Avoid Getting Burned When Buying Firewood
- Washington State Department of Agriculture: Firewood (Handbook 130, Section 2.4 text as adopted)
- Utah State University Extension: Wood Heating
Common questions
How do I measure an uneven or partial stack?
Take a few length, height and depth readings, average each dimension, and enter those averages. For a short leftover row, enter its actual length and height, and either the true depth or the piece length with a fraction of a row (for example 0.5 rows).
Does a thrown or loosely piled load count as a cord?
Not until it is stacked. The legal cord assumes the wood is ranked and well stowed. A dumped truckload occupies more space for the same wood, so measuring it as dumped will overstate the cords.
Can I add more than one pile?
Yes. Use Add another stack for a second row, a leftover partial stack, or wood in more than one place, then read the total.