Home / Price per cord comparison

Price per cord comparison

Sellers often quote different units. Convert each quote to a price per full cord so you can see which offer is actually cheaper for the same stacked volume.

Seller quotes

Enter each quote the way the seller wrote it, then fill in enough detail to convert it to a full cord. For a face cord or rick, the piece length is required. For a truckload or bundle, enter stacked dimensions or cubic feet. Utah State University Extension estimates that a full-size pickup with a standard bed, loaded even with the top of the bed, holds about 64 cubic feet (half a cord). That is an estimate, not a legal unit; use it only if you have no better measurement.

How quotes are converted

Every price is divided by the number of full cords in the quote. A full cord is 128 cubic feet of ranked and well stowed wood, from NIST Handbook 130, Section 2.4. The NCWM and NIST buyer fact sheet uses the same definition, and reminds buyers that "truckload," "face cord," "rack" and "pile" have no legally defined meaning.

A face cord or rick is converted as a 4-by-8-foot face, one piece deep, which is how Utah State University Extension describes a face cord. The piece length decides the volume: 16-inch pieces are one third of a cord; 12-inch pieces are one quarter; 24-inch pieces are one half. If a seller uses a different face size, enter the stacked dimensions or the cubic feet instead, using the truckload or bundle fields.

A truckload or bundle is converted from the stacked dimensions or from a cubic-foot figure you enter. University of Maryland Extension gives a worked bundle example of 1 foot by 1 foot by 2 feet, which is 2 cubic feet, or 1/64 of a cord. Utah State University Extension estimates a full-size pickup with a standard bed, loaded even with the top of the bed, at about 64 cubic feet, or half a cord. Small beds and loose loading hold less. Measure when you can.

Worked examples

A face cord of 16-inch pieces priced at $75.00 contains 0.333 of a full cord, so the price per full cord is $225.00. A full cord quoted at $250.00 is already $250.00 per cord, which is higher in this example.

One bundle stacked 1 by 1 by 2 feet is 2.00 cubic feet, or 0.016 of a full cord (1/64). At $8 for that bundle, the equivalent price per full cord would be $512.00.

Sources

Common questions

Why not just compare the number on the invoice?

Because a $90 face cord can be more expensive, per unit of wood, than a $250 full cord, depending on the piece length. Comparing price per full cord puts every quote on the same 128-cubic-foot basis.

Can a seller legally advertise a truckload or a face cord?

In states that adopted NIST Handbook 130 Section 2.4.4, those terms shall not be used when advertising, offering or selling wood for fuel. Wood is to be sold by the cord or a fraction of a cord, or, for small packages, by the cubic foot. Local rules vary, so check with your state weights and measures office. This tool still converts informal quotes so you can compare them.

What about loose wood tossed into a truck?

The cord is a stacked measure. A thrown load has more air in it, so treating the truck bed as if it were a neat stack will usually overstate the wood you received. Ask for the wood to be stacked, or stack it and measure before you burn any, as the NCWM and NIST fact sheet recommends.

Estimates only. These tools are for planning, not quotes and not legal or financial advice. A full cord is 128 cubic feet of ranked and well stowed wood under NIST Handbook 130. In states that adopted that rule, firewood is sold by the cord or a fraction of a cord, not by the face cord, rick, pile or truckload. Confirm your measurements and local rules with the seller and your state weights and measures office.

By James Johnston. Updated November 2026. Estimates for planning, not advice. See sources and method.